HWS H-125 (1.25")

H125HWS H-125

  • Benefits

    • Soft Water Savings for detergents and chemicals
    • Reduced Energy and Water consumption
    • Improved efficiency and extend the life of process equipment and heat exchange systems
    • Reduced maintenance costs
    • Initial and long term costs savings
  • Features

    • System Design Options: Single, Twin Parallel, Twin Alternating, Demand Recall, Salt Recycling, Brine Reclaim
    • No Raw Water Bypass
    • Separate Source Regeneration
    • Daily Peak Flow Rate Displayed
    • Alternate Fill
    • 1.25″ internal porting for higher service flow rates with less pressure drop
    • 12-volt operation (AC or DC) uses less than $2/year of electricity and a 12 volt relay driver
    • Fully Programmable Cycles and Times (9 cycles)
    • Smart Controller monitors usage patterns and optimizes performance
    • Corrosion resistant control valve body and tanks for longer life
    • All internal components are lead free
    • No Nuts, Bolts or Screws – easy to service
HWS H-151 (1.5″)

HWS-H-151HWS H-151

  • Benefits

    • Soft Water Savings for detergents and chemicals
    • Reduced Energy and Water consumption
    • Improved efficiency and extend the life of process equipment and heat exchange systems
    • Reduced maintenance costs for a commercial water softener
    • Initial and long term costs savings
  • Features

    • System Design Options: Single, Twin Parallel, Twin Alternating, 3,4,5 or 6-plex systems, Salt Recycling, Brine Reclaim
    • No Raw Water Bypass
    • Separate Source Regeneration
    • Daily Peak Flow Rate Displayed
    • Alternate Fill
    • 1.50″ Inlet and Outlet provide higher service flows with less pressure drop
    • 12-volt operation (AC or DC) uses less than $2/year of electricity and a 12 volt relay driver
    • Fully Programmable Cycles and Times (9 cycles)
    • Smart Controller monitors usage patterns and optimizes performance
    • Non- Corrosion internal components
    • Lead free brass valve
    • Piston Operated Design
    • No Nuts, Bolts or Screws – easy to service
HWS H-200M (2")

H200M

HWS H-200M

  • Benefits

    • Soft Water Savings for detergents and chemicals
    • Reduced Energy and Water consumption
    • Improved efficiency and extend the life of process equipment and heat exchange systems
    • Reduced maintenance costs
    • Initial and long term costs savings
  • Features

    • System Design Options: Single, Twin Parallel, Twin Alternating, 3,4,5 or 6-plex systems, Salt Recycling, Brine Reclaim
    • No Raw Water Bypass
    • Separate Source Regeneration
    • Daily Peak Flow Rate Displayed
    • Alternate Fill
    • 2.00″ Inlet and Outlet provide higher service flows with less pressure drop
    • 12-volt operation (AC or DC) uses less than $2/year of electricity and a 12 volt relay driver
    • Fully Programmable Cycles and Times (9 cycles)
    • Smart Controller monitors usage patterns and optimizes performance
    • Non- corrosive internal components
    • Lead Free Brass Valve
    • Piston Operated Design
    • No Nuts, Bolts or Screws – easy to service
    • Optional Water Reclaim system available
HWS H-200 (2")

H300HWS H-200

  • Benefits

    • Soft Water Savings for detergents and chemicals
    • Reduced Energy and Water consumption
    • Improved efficiency and extend the life of process equipment and heat exchange systems
    • Reduced maintenance costs
    • Initial and long term costs savings
  • Features

    • System Design Options: Single, Twin, Triplex and Quad Alternating, Twin, Triplex and Quad Demand Recall, Top Mount and Side Mount configurations
    • Solid State microprocessor can control from one to four units allowing for system add ons
    • Regeneration can be initiated with a time clock, meter delayed or meter immediate
    • Soft Water Brine refill reduces brine tank maintance
    • User friendly controller with removable POD display allowing for remote mount of display for top mount systems
    • Economical built in electronic meter means no extra piping
    • Lead Free Brass body with NSF approved Food Grade Electro-deposited epoxy coating to protect internally and externally against corrosion
    • Corrosion Free Noryl back plate
    • Nema 3 Enclosure
    • Optional Calendar Day override from 1-28 days
    • 24 Volt output AC adapter is safe and comes with a 15′ cord for easy installation
    • Reliable and proven DC drive
    • Optional System Control Board – add 3rd and 4th unit for demand recall or operating chemical feed pumps, booster pumps and to lock out an RO system
    • Motorized Alternating Valve (MAV) provides Twin Alternating, No Raw Water Bypass, Treated or Non Treated water for regeneration and separate source regeneration
HWS H-300 (3")

H300HWS H-300

  • Benefits

    • Soft Water Savings for detergents and chemicals
    • Reduced Energy and Water consumption
    • Improved efficiency and extend the life of process equipment and heat exchange systems
    • Reduced maintenance costs
    • Initial and long term costs savings
  • Features

    • System Design Options: Single, Twin, Triplex and Quad Alternating, Twin, Triplex and Quad Demand Recall, Top Mount and Side Mount configurations
    • Solid State microprocessor can control from one to four units allowing for system add ons
    • Regeneration can be initiated with a time clock, meter delayed or meter immediate
    • Soft Water Brine refill reduces brine tank maintenance
    • User friendly controller with removable POD display allowing for remote mount of display for top mount systems
    • Economical built in electronic meter means no extra piping
    • Lead Free Brass body with NSF approved Food Grade Electro-deposited Epoxy coating to protect internally and externally against corrosion
    • Corrosion Free Noryl back plate
    • Nema 3 Enclosure
    • Optional Calendar Day Override from 1-28 days
    • 24 Volt output AC adapter is safe and comes with a 15′ cord for easy installation
    • Reliable and proven DC drive
    • Optional System Control Board – add 3rd and 4th unit for demand recall or operating chemical feed pumps, booster pumps and to lock out an RO system
    • Motorized Alternating Valve (MAV) provides Twin Alternating, No Raw Water Bypass, Treated or Non Treated water for regeneration and separate source regeneration
HWS TN2 (2")

TN2HWS TN2

  • Benefits

    • Soft Water Savings for detergents and chemicals
    • Reduced Energy and Water consumption
    • Improved efficiency and extend the life of process equipment and heat exchange systems
    • Reduced maintenance costs
    • Initial and long term costs savings
  • Features

    • System Design Options: Single, Twin, Triplex and Quad Top Mount 2″ Inlet and Outlet
    • Solid Brass Valve with a motor driven, time tested hydraulically balance piston, seal and spacer concept to pilot service flow not dependent on water pressure
    • No diaphragms to rupture or false transfer
    • Up to 80 gpm hard water bypass during regeneration
    • Optional “no hard water bypass piston” for twin or multiple systems
    • Factory wired electrical systems for easy installation
    • Mechanical or Electronic Meters available in 1″, 1.5″ or 2″
    • Stainless steel backplate will not rust or corrode
    • Optional Microprocessor provides meter demand regeneration with adjustable cycles, times and calendar day override
      Nema 3R rated
HWS TNT (3")

TNTHWS TNT

  • Benefits

    • Soft Water Savings for detergents and chemicals
    • Reduced Energy and Water consumption
    • Improved efficiency and extend the life of process equipment and heat exchange systems
    • Reduced maintenance costs
    • Initial and long term costs savings
  • Features

    • System Design Options: Single, Twin Parallel, Twin Alternating, Triplex Alternating, Quad Alternating Flanged Top Mounted or Optional Side Mounted adapter
    • 3″ NPT inlet and outlet solid brass control valve
    • Solid Brass Valve with a motor driven, time tested hydraulically balance piston, seal and spacer concept to pilot service flow not dependent on water pressure
    • No diaphragms to rupture or false transfer
    • Up to 170 gpm hard water bypass during regeneration
    • Optional “no hard water bypass piston” for twin or multiple systems
    • 5 cycle controller is available with either downflow “co-current” or upflow “counter-current” brining with easy adjustable cycle times
    • Mechanical or Electronic Meters available in 2″, 3″
    • NT Electronic Meter links multiple valves with diagnostics
    • Systemax Electronic Demand Controller is a powerful microprocessor that can be configured to operate multiple system designs
Downloads